DIY wood kitchen islands are becoming very popular, and for good reason. This is where you can have a wood countertop placed over a metal or concrete surface. A lot of people prefer a smooth wood countertop to a more bumpy one. This makes for easier clean up and less chance of food particles and crumbs getting caught in the grooves of a solid surface. If you’re looking to save a little money, you could install your own DIY wood countertop. It’s much cheaper than buying a ready-made one and you don’t have to pay an experienced craftsman to do it for you either.
First you need to make sure that you have adequate preparation for your DIY wood kitchen island. It needs to be completely dry and clean so that there are no surprises once you put the finishing touches on it. Sandpaper should be used specifically for wood surfaces, as anything with sandpaper will cause damage over time. Using coarse sandpaper will probably ruin your new live edge wood kitchen island.
If you’re putting an existing wood countertop on top of your new DIY wood kitchen island, then you must take that into account. The best way to protect your existing countertop is to coat it with a waterproof coating. It’s a good idea to use an extra coat of finish as well, especially if you live in a humid area and exposing your wood to water on a regular basis. This way your wood countertop will last for many years.
You’ll also need to be careful when cutting your wood to size. When you’re doing this process, always make sure that you have a flat edge. Many people cut their edges too steeply and this causes the wood to expand. When you’re building a DIY wood kitchen island, make sure your edges are blunt and that the wood won’t crack.
The last piece of wood you’ll need for your edge wood kitchen island is the tongue. You’ve probably seen this part of a piece of wood before; it’s typically a straight strip of wood running along the edge of the piece of wood. The wood doesn’t actually move when you’re sawing it, but it does vibrate when you apply pressure to it. This is what makes it important to get your saw at an angle that will keep the wood from vibrating.
I recommend that you leave one long end of each strip of wood exposed. If you don’t do this, the wood will actually fold back on itself when you cut it. You can use nails or screws to attach your live edge wood kitchen island planks to your other wooden pieces. Make sure that the nails are wood screws and not hardware screws.
When building a DIY live edge wood kitchen island, you want to make sure that you have everything ready beforehand. If you’re using wood glue, you also want to make sure that the nails you use are wood screws. There’s nothing worse than driving your nail into wood and then pulling it out because the nail isn’t wood enough. Also, you should take all of your wood pieces to a lumber yard so that you can simply measure the boards to make sure they are the right length.
One of the best things about a wood kitchen island is that it is made specifically for the environment and specifically for your planned wood working and dining space. Since a wood kitchen island can be quite heavy, you’ll want to make sure that it is built properly. Make sure that all of your wood is perfectly straight, the nails are all smooth and strong, and that the wood is completely dried before you start assembling it. Once you’ve taken these things into consideration, your next step will be to simply place your wood kitchen island in your kitchen!